Prior to the 2022 Energy Science & Technology Conference, some interesting lead way was made in the course of re-developing the Tesla Brush Bulb. It was borne in mind that the brush formation which Tesla speaks of must have had influence with […]
As in the previous post where an evacuated sphere possessing no special physical characteristics was shown displaying physical phenomena, the following shows work carried out with a Brush Bulb. In this circumstance, this Brush Bulb has been evacuated via a turbo-molecular pump […]
References made in this post can be seen in the latest High Frequency Illumination Lecture from the 2022 Energy Science & Technology Conference. As a new turbo molecular pump has become available, certain high vacuum experiments have been carried out to investigate […]
Below are photos of a replicated Tesla brush bulb at various RF power levels. The bulb is directly connected to the high tension winding of a high power RF source, ultimately connected to only the carbon button. This bulb shown, as it […]
As the completion of an ultra high vacuum system is now in use, the final development of the Tesla Bruh Bulb has now been achieved. This is to say that with the tedious nature of the very construction of the bulbs, a […]
As of now, parts have been received for a diffusion vacuum pump which is capable of pulling a vacuum to 0.000000001 Torr (roughly the same pressure experienced in Low Earth Orbit, LEO). This will be the driving force behind all brush bulb […]
A brief video outlining misconceptions and erroneous details on Tesla’s Brush Bulb, which most people make errors on. Different demonstrations show the brush effect as well as other phenomena.
Using a glass lathe properly constructed by Jeremy Jones, a more sophisticated approach to making Tesla carbon button lamps has been achieved. As such, outstanding extraordinary effects have been obtained within the seemingly “dead vacuum” of the bulb. That is, the bulb […]
This video shows the luminous effects obtained in a seemingly void vacuum, when excited by high frequency alternate currents of great potential. These effects and the overall bulb construction was described by Nikola Tesla in 1892 before the London Institute of Electrical […]
A disclosed video in light of the last ESTC, which outlines plasma manifestations, formed in simple carbon filament lamps, possessing no inert gas within the bulb. For simplicity, the tertiary coil setup employed, is that of the design created by Eric P. […]
