Prior to the 2022 Energy Science & Technology Conference, some interesting lead way was made in the course of re-developing the Tesla Brush Bulb. It was borne in mind that the brush formation which Tesla speaks of must have had influence with […]
As in the previous post where an evacuated sphere possessing no special physical characteristics was shown displaying physical phenomena, the following shows work carried out with a Brush Bulb. In this circumstance, this Brush Bulb has been evacuated via a turbo-molecular pump […]
References made in this post can be seen in the latest High Frequency Illumination Lecture from the 2022 Energy Science & Technology Conference. As a new turbo molecular pump has become available, certain high vacuum experiments have been carried out to investigate […]
Using an extremely simplistic setup for the first round of testing by employing the recently buried ground system, a transceiver is used to receive various stations by primarily using the telluric component of the transmitting station. In this video, the second clip […]
In similarity to a previous post dating back to October of 2021, new work has been carried out on establishing a bettering electrical Earth ground for telluric (through the Earth) Tesla communication via longitudinal transmission. So that to establish a decent connection […]
Below are photos of a replicated Tesla brush bulb at various RF power levels. The bulb is directly connected to the high tension winding of a high power RF source, ultimately connected to only the carbon button. This bulb shown, as it […]
As the completion of an ultra high vacuum system is now in use, the final development of the Tesla Bruh Bulb has now been achieved. This is to say that with the tedious nature of the very construction of the bulbs, a […]
A fair amount of work has been progressed on finalizing the first suburban seismic forecasting station, in that recently, the transmitter which will be used for broadcasting seismic data on the frequency of 7102 kilocycles has been completed. This transmitter will be […]
During early January of 2022, a systematic plan was assembled to construct a telluric testing stage at EPD Laboratories in Tonopah Nevada, in which the objective was to employ two specially constructed 160 meter transmitting and receiving coils for this very operation. […]
As of now, parts have been received for a diffusion vacuum pump which is capable of pulling a vacuum to 0.000000001 Torr (roughly the same pressure experienced in Low Earth Orbit, LEO). This will be the driving force behind all brush bulb […]