The following section will cover documentation and related information on experimental efforts, concerning the development of an ultra low frequency vacuum tube amplifier, intended for Electrodynamic Seismic Forecasting and audio use. Such an amplifier greatly differs from conventional units, as its electrical […]
The following images depict the first attempt of replicating a potential-shunt coil, as employed in the original Alexanderson Antenna transmission design. Such antenna configurations were employed in Bolinas California, with one example (Grimeton SAQ) still in operational status. The potential coil replicated, […]
As with other high vacuum tubes recreated under Tesla’s name, the next step was to observe the production of speciality rays which Tesla dubbed as Shadowgraphs, since the fogging and exposures created on photographic plates resembled shadows. These results were observed by […]
As showcased in the 2022 Energy Science & Technology Conference, a Tesla Magnifying Transmitter (TMT) was demonstrated to produce an audible modulated discharge. This coil arrangement proved to be acceptable, although for telluric transmission purposes, there existed some negative drawbacks. For instance, […]
Through the use of a handmade Tesla Carbon Button Lamp, the effect of plasma rotation as noted by Tesla in his 1892 book and lecture, “Experiments With Alternate Currents of High Potential and High Frequency,” was successfully replicated. This is likely one […]
The following engineering report was produced in response to queries on determining and predicting a single layer coil’s electrical properties. That is, its frequency, bandwidth, and overall efficiency. This report provides simplistic algebraic formulae that give engineer-able answers for the average experimenter. […]
The video above explains the current layout of the seismic station’s main receiving and measuring rack, accompanied on the side with its conjugate radio frequency rack. As mentioned in the latter half of the video, the separate battery array and cathode follower […]
As current attention has shifted aside from conference related material, the finalizing touches to the current suburban based seismic forecasting station has been underway. In terms of receiving the ionospheric-electrostatic component of such seismic events, a Marconi style flat top antenna has […]
Despite the intense heat of the summer, the primordial construction of the telluric test platform has now been finalized with all necessary coax connections secured. To accommodate the physical layout of the surrounding area, some slight changes to the original design as […]
Building off from the newly existing Earth-ground instillation as described in this post, an experimental platform has been constructed for the placement of any coil apparatus atop the dual barrel Earth connection. It was initially proposed by Eric Dollard to implement a […]